Your position: News Detail
-
Precautions for Micro Bearing Heating
1. Place the yoke on the end face of the main unit.
2. Plug the plug into a power outlet with a control switch.
3. check the grounding line is good, power after the test pencil test.
4. press the start button, the host power.
5. check the yoke to the ground should be no voltage.
6. press the stop button host power, stop heating.
7. according to different specifications of the miniature bearings or other parts, choose a different yoke iron sets, the yoke on the host of the top surface, should be consistent with the formation.
8. heating miniature bearings, the sensor should be inserted into the "sensor socket", and the sensor close to the workpiece is heated.